U-Line SS-98 Manual De Usuario

Descargar
Página de 19
U-Line Inspect & Plan
3
3 Inspect & Plan
Product Registration
You have received a carton containing your ice maker unit with a 
package inside containing a Use and Care Guide, a Product 
Registration Card, and a water line kit. Please complete and mail 
the Product Registration Card or register online at www.U-
LineService.com. Once your unit is installed, keep the Use and 
Care Guide and this Installation Guide in a safe place for future 
reference.
Models Covered
This installation guide covers the following models
Please carefully follow the directions that apply to your unit and 
your intended design.
U-ADA15IMB-00
ULN-BI98B-00
U-ADA15IMS-00
ULN-BI95WH-00
U-ADA15IMS-01
ULN-SP18B-03
U-BI2115B-00
ULN-SP18WH-03
U-BI2115S-00
ULN-SS1095FC-03
U-BI2115S-01
ULN-SS1095FD-03
U-BI2115SOD-00
ULN-SS1095NF-03
U-BI2115SOD-01
ULN-SS95-03
U-BI2115W-00
ULN-SS98-03
ULN-BI95B-00
ULN-WH95TP-03
ULN-BI95WH-00
Tools / Material Required
• Screwdrivers — slotted and Phillips head
• 1/4-inch thick door panel material and cutting tools (If installing 
a 1/4” Panel)
• 1/4” Nut Driver
• 5/16” Nut Driver
• Side Cutter
• Copper tubing cutter
• 12” Level
• 9/16” Open end wrench
• 7/16” Open end wrench
• Pliers
• Copper tubing
A complete water hook up kit is also available for purchase from 
your dealer. Order U-Line Part No. WATERHOOKUP.
Exterior Cleaning
Black and White Models:
• Black and White surfaces may be cleaned with a mild detergent 
and warm water solution. Do not use solvent-based or abrasive 
cleaners. Use a soft sponge and rinse with clean water. Wipe 
with a soft, clean towel to prevent water spotting.
Stainless Models:
• Stainless door panels, handles and frames can discolor when 
exposed to chlorine gas, pool chemicals, salt water or cleaners 
with bleach.
• Keep your Stainless unit looking new by cleaning with a good 
quality all-in-one stainless steel cleaner/polish on a monthly 
basis. For best results use Claire Stainless Steel Polish and 
Cleaner, which can be purchased from U-Line Corporation 
(Part numbers 173348). Frequent cleaning will remove surface 
contamination that could lead to rust. Some installations may 
require cleaning on a weekly basis.
• Do not clean with steel wool or abrasive pads.
• Do not use cleaners that are not specifically intended 
for stainless steel on stainless surfaces (this includes 
glass, tile and counter cleaners).
• If any surface discolors or rust appears, clean it quickly with 
Bon-Ami or Barkeepers Friend Cleanser and a non-abrasive 
cloth. Always clean in the direction of the grain. Always finish 
this process with Claire Stainless Steel Polish and Cleaner or 
comparable product to prevent further problems.
WARNING
Rust that is allowed to linger can penetrate into the 
surface of the stainless steel and complete removal of 
the rust may not be possible.