HP 320 G6 505683-421 Manual De Usuario

* - not supported by HP at this time.
**2DPC: LV runs at 1066, Std voltage runs at 1333
***3DPC: LV/Std voltage runs at 800

 
NOTES:

PC3-10600 DIMMs have a maximum speed of 1333MHz. PC3-8500 DIMMs have a maximum speed of 1066MHz
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities.
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the slower
DIMM is on the other processor.
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be 1066MHz.
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other
channels, at the maximum speed will be 1066MHz.
If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz.
Maximum memory speed will also depend on the processor installed
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.

 

Population order; start with "A" first, "B" second, "C" third, etc.

 

 

slot #

population order

Chnl 1

1

G

2

D

 

3

A

 

 

 

Chnl 2

4

H

5

E

 

6

B

 

 

 

Chnl 3

7

I

8

F

9

C

 

6GB, consisting of three (3) 2GB dual-rank PC3-10600 RDIMMs

Memory

DA - 13344   Worldwide — Version 59 — March 5, 2013

Page  35