Philips SGC5101BD/05 Manual De Usuario

Setting Up the Philips amBX PC Scenes

Warning

You can only test an animation when the scene is selected in the Scenes Selector.

Disable a Philips amBX™ PC Gaming Peripheral in a Scene

Note

Disabling a peripheral in the Scene Settings Screen has

no effect

on the status of the peripheral

while you are gaming. You merely define that the specific peripheral will not be used in the scene
you selected in the Scenes Selector.

1. Select the

Scene Settings

tab.

The 'Scene Settings' screen appears.

2. Select the scene you want to change in the

Scenes Selector

3. Click the

icon

of the peripheral you want to turn off in the Scene Overview.

The 'Peripheral Scene Settings' panel appears.

4. Click the

Disable

button.

The peripheral will not be active in the selected scene.

5. Click the

button to confirm the changes.

The 'Peripheral Scene Settings' panel closes.

6. Click the

Save Changes

button.

The changes to the Peripheral Scene Settings are stored.

Warning

If you do not click

Save Changes

after you closed the 'Peripheral Scene Settings' panel, your

changes will be lost as soon as you close Direct Control or select the Configuration tab.

In the Scene Overview, you recognize an enabled peripheral by the reference box that indicates his current
settings. When you disable the peripheral, the reference box disappears from the overview.

Enabled peripheral

Disabled

peripheral

The

Disable

button is a

toggle button

When you press the button, an action starts and the label of the

button changes, describing the opposite action.

Toggled State 1

Pressed State

Toggled State 2

To enable the Philips amBX™ PC Gaming Peripheral again, you click the same button in

Peripheral Scene

Settings panel

that is now labeled '

Enable'

Disable an Animation in a Scene

1. Select the

Scene Settings

tab.

The 'Scene Settings' screen appears.