Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Philips
  4. DCW8010/10
  5. Guía De Instalación Rápida

Philips DCW8010/10 Guía De Instalación Rápida

Descargar
Página de 2
 
PROG/ 
   CLOCK  
PROG/ 
   CLOCK  
Quick start guide
USB
3 sec
CD
USB
MP3-LINK
DCW8010
Always there to help you
Register your product for further support at
www.philips.com/welcome
Quick start guide
Option 1: Use iOS 5 Wi-Fi network login sharing (recommended)
Option 2: Set up through webpage configuration
Wait up to 30 seconds until “Philips DCW8010 
XXXXXX” is detected. Then, tap it.
Disable the 3G network.
Dock your iPod touch/iPhone/iPad 
onto the system.
Wait<30sec
Enter the IP address 192.168.1.1.
5.X
4.3
Check your iOS version 
AirPlay
X.X.X
Settings
General
Network
Settings
General
About
192.168.1.1
Remember to turn on 
the 3G network after 
successful AirPlay 
connection.
Check your router is selected.
Select this system.
Tap    to play music.
Your Wi-Fi Network
If your router has a WPS button, you can connect the 
device to the router through WPS.
a
 Press WIFI SETUP, then the light blinks green and 
yellow alternately.
b
 Press the WPS button on your home Wi-Fi router.
c
 Wait up to 2 minutes until the light stops blinking and 
you hear a confirmation tone.
Open Settings.
Open Settings.
Wait  up  to  1  minute  until  the  light 
stops  flashing  and  you  hear  a 
confirmation tone.
If the AirPlay icon does not appear or there is no sound output, try the following ways:
a
 Turn on and off the Airplane Mode in Settings.
b
 Restart your iPhone.
c
 It is recommended to restart your home router.
Tap AirPlay icon       .
Open iPod application.
Follow the on-screen instructions to 
configure the Wi-Fi settings for this system.
a
 If it takes more than 2 
minutes to see the screen of 
step 8, try to turn on/off the 
Airplane mode (Settings -> 
Airplane Mode) and start 
from step 2 again.
b
  If  the  problem  remains, 
restart your iPhone and start 
from step 2 again.
Tap  ALLOW  (allow)  to  share  your 
Wi-Fi settings with this system.
Tap Wi-Fi.
Open Safari.
Wait for 35 seconds until the light in the middle 
of the WIFI SETUP button turns to solid yellow.
WiFi SETUP
Connect your iPod 
touch/iPhone/iPad to your 
home router by Wi-Fi.
Your Wi-Fi Network
WiFi SETUP
Wait 35sec
Wait for 35 seconds until the light in the middle 
of the WIFI SETUP button turns to solid yellow.
WiFi SETUP
Wait 35sec
Wait< 1min
Wait up to 2 minutes until the 
light stops flashing and you hear 
a confirmation tone.
Wait< 2min
Philips DCW8010 XXXXXX
Philips DCW8010 XXXXXX
a
 If the light does not turn solid green after 2 
minutes, reconnect the power adaptor, and then 
repeat steps from beginning.
b 
To change Wi-Fi setup after first-time setup, 
press and hold 
WIFI SETUP for more than 3 
seconds to reset Wi-Fi settings. Then follow the 
previous steps to change your network settings.
wireless music system with 
AirPlay
PROG/ 
   CLOCK  
e subject to change without notice
©2012 Koninklijke Philips Electronics N.V.
All rights reserved. 
DCW8010_10_QSG_V1.2
Before using your product, read all accompanying safety information.
Lesen Sie vor der ersten Verwendung Ihres Produktes alle beiliegenden Sicherheitsinformationen.
Antes de usar el producto, lee toda la información adjunta a la de seguridad
Veuillez lire toutes les consignes de sécurité fournies avec votre produit avant de l’utiliser.
Upgrade your iPod touch, iPhone, or iPad to iOS 
4.3 or above.
Note: Make sure that Wi-Fi is enabled on your 
iPod touch, iPhone, or iPad.
Before setup, you are recommended to upgrade your 
iPod touch/iPhone/iPad to the latest iOS version. For 
iPhone 4S users, please upgrade to iOS 5.1 or above for 
optimal performance.