Philips DC190/05 Guía De Instalación Rápida

Setup

1 In standby mode, press and hold TIME

SET/AUTO SCAN for 2 seconds.
» The hour digits begin to blink.

2 Press TUNING +/- to set the hour.
3 Press TIME SET/AUTO SCAN .

» The minute digits begin to blink.

4 Press TUNING +/- to set the minute.
5 Press TIME SET/AUTO SCAN to

confi rm.
» The week day digits begin to blink.

6 Press TUNING +/- to set the week day.
7 Press TIME SET/AUTO SCAN to

confi rm.

Set clock

1 In the tuner mode, press and hold TIME

SET/AUTO SCAN for more than 2
seconds to activate automatic program
mode.
» All available stations are programmed

in the order of waveband reception
strength.

» The fi rst programmed radio station is

broadcast automatically.

2 Press PRESET +/- to select a preset

number.

E Tip

Detailed functions and features are

•

described in the user manual.

Program and listen to radio
stations

Play from iPod

Setup

Set the alarm timer

Set alarm mode

1 Adjust the WAKE TO iPod/RADIO/

BUZZ control to select the source for
the alarm.

» When the alarm time comes, the

selected iPod, radio or buzzer turns on.

Activate and deactivate the alarm timer

1 Press ALARM 1 or ALARM 2 repeatedly

to activate the timer.

» If the timer is activated,

is displayed.
To deactivate the alarm timer, press

•

ALARM 1 or ALARM 2 repeatedly
until is displayed.

» If the timer is deactivated,

disappears.

Repeat alarm

1 When the alarm rings, press REPEAT

ALARM/BRIGHTNESS CONTROL .

» The alarm repeats ringing minutes later.

E Tip

You can press

•

TUNING+/- to adjust

interval to repeat alarm.

Stop alarm ring

1 When the alarm rings, press the

corresponding ALARM 1 or ALARM 2 .

» The alarm stops but the alarm settings

remain.

1 Push to open the dock compartment.

2 Place the iPod in the dock.

3 Press SOURCE repeatedly to select iPod

source.

» The connected iPod plays automatically.

To pause/resume play, press

•

To skip to a track, press

•

/ .

To search during play, press and hold

•

/ , then release to resume normal
play.

Enjoy

1 Ensure that you have set the clock

correctly.

2 Press and hold ALARM 1 or ALARM 2

for 2 seconds.
»

and hour digits begin to

blink.

3 Press TUNING +/- repeatedly to set the

hour.

4 Press ALARM 1 or ALARM 2 to

confi rm.
»

and minute digits begin

to blink.

5 Repeat steps 3-4 to set the minute.
6 Repeat steps 3-4 to select whether to ring

alarm on weekdays or at weekend.

» “L XX(volume level)” begins to blink.

7 Repeat steps 3-4 to set the maximum alarm

volume.

DC190_05_QSG_EN.indd 5-7

4/20/2009 4:30:30 PM