Philips BM5B/10 Manual De Usuario
11
EN
1
Press on a slave speaker.
»
The indicator on the speaker flashes
blue, while that on the previous master
speaker turns off.
»
The GROUP indicators on both
speakers start flashing until the new
master speaker sets up connection
with its slaves.
»
The volume indicator on the speaker
turns white while that on the previous
master speaker turns green.
2
'Connect a Bluetooth-enabled device' on
3
After successful Bluetooth connection, play
music on the Bluetooth device.
»
Music streams from your Bluetooth
device to the whole group of speakers.
Switch to single mode
A
Press GROUP on the master to enter
single mode.
»
The slaves keep looking for the master
until timeout in 15 minutes.
»
You can create a new group with the
slaves or press GROUP on a slave to
enter single mode.
• Press GROUP on the master again to
resume group mode.
B
Press GROUP on a slave to switch to
single mode.
»
The GROUP indicator on the speaker
turns off, and the indicator flashes
blue.
• Press GROUP again to rejoin a group.
»
The GROUP indicator lights up again
and the indicator turns off.
Control play
Note
•
Due to data buffering, you may experience some
delay when you play/pause or adjust volume from the
Bluetooth device.
Control from the speaker
• In single mode, turn the
speaker on/off.
• In group mode, turn the
whole group of speakers on/
off.
(unavailable
in AUDIO
IN mode)
• In single mode, pause/resume
play of the current speaker.
• In group mode, pause/
resume play of the whole
group.
Volume
knob
• Press to mute/unmute the
current speaker.
»
The volume indicator
flashes when the speaker
is muted.
• Turn clockwise/anticlockwise
to increase/decrease volume
of the current speaker.
Control from the connected Bluetooth device
You can use controls on your
You can use controls on your
Bluetooth device directly.