CRU RJR110, Carrier Only, SATA 3Gb/s 6651-5000-0500 Prospecto

Figure 3: Activity Indicator Cable

CRU-DataPort (CRU) warrants the RhinoJr RJR110 to be free of sig-

nificant defects in material and workmanship for a period of two years 

from the original date of purchase. CRU’s warranty is nontransferable 

and is limited to the original purchaser.

The warranties set forth in this agreement replace all other warranties. CRU 

expressly disclaims all other warranties, including but not limited to, the 

implied warranties of merchantability and fitness for a particular purpose 

and non-infringement of third-party rights with respect to the documenta-

tion and hardware. No CRU dealer, agent or employee is authorized to 

make any modification, extension, or addition to this warranty. In no event 

will CRU or its suppliers be liable for any costs of procurement of substi-

tute products or services, lost profits, loss of information or data, comput-

er malfunction, or any other special, indirect, consequential, or incidental 

damages arising in any way out of the sale of, use of, or inability to use 

any CRU product or service, even if CRU has been advised of the possibility 

of such damages. In no case shall CRU’s liability exceed the actual money 

paid for the products at issue. CRU reserves the right to make modifications 

and additions to this product without notice or taking on additional liability. 

EMI Standard:  

FCC Part 15 Class B, CE

EMC Standard:  

EN55022, EN55024

This device has been tested and found to comply with the limits 

for a Class B digital device, pursuant to Part 15 of the FCC rules. 

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received;    

 

 

including interference that may cause undesired operation.

      A-8-110-0003  Rev. 1.1

This cable (provided) is used for host connection to the Activity In-

dicator Pin. Some SATA host controllers and system motherboards 

provide support for the Activity Indicator feature (refer to the SATA 

host controller or system motherboard manufacturer’s documenta-

tion for further information). Refer to Figure 2 for Activity Indicator 

Pin location.

NOTE: A #1 and #2 Phillips screwdriver will be required.

1.  Remove cover from the carrier by turning screw clockwise. 

Slide the cover off carrier (Figure 4).

2.  Carefully insert drive (not included) into the carrier. Turn the 

drive/carrier assembly over.

3.  Bottom-mount the drive into the carrier with four (4) Phillips 

screws (Figure 5). Reinstall cover onto the carrier. Secure the 

cover by turning the screw counterclockwise a few rotations 

only (too many rotations will remove the screw).

Figure 5: Installing a Drive into the Carrier

*Requires an additional 

cable (not provided)

To RJR110 Activity 

Indicator Pin

To Chassis Device Activity LED 

Cable (optional)*

To Host Controller or 

System Motherboard

Turn Screw 

Clockwise

Insert SATA Drive 

(not included)

Slide Cover 

Off

Bottom-Mount 

Drive

1

2

Figure 4: Cover Removal