Philips 32HFL5008D/12 Manual De Usuario
EN 30
Clone TV settings
Easily copy TV settings to a USB storage
device, then clone the settings onto another
Philips TV.
Copy TV settings to USB
1. Connect a formatted USB storage device
to a USB connector on the TV.
2. In professional setup menu, select
device, then clone the settings onto another
Philips TV.
Copy TV settings to USB
1. Connect a formatted USB storage device
to a USB connector on the TV.
2. In professional setup menu, select
[Clone/Upgrade] > [Clone to TV], then
press OK. All TV settings are copied to the
USB device.
Clone TV settings to another TV
1. Connect the USB device to the Philips TV
to be cloned.
2. In professional setup menu, select
press OK. All TV settings are copied to the
USB device.
Clone TV settings to another TV
1. Connect the USB device to the Philips TV
to be cloned.
2. In professional setup menu, select
[Clone/Upgrade] > [Clone to USB], then
press OK. All TV settings are cloned to the
TV.
press OK. All TV settings are cloned to the
TV.
Download software via RF
The TV supports downloading of software
via RF (Radio Frequency).
1. In the professional setup menu, select
via RF (Radio Frequency).
1. In the professional setup menu, select
[Clone/Upgrade] > [RF Upgrade].
2. Use the Navigation buttons to select a
setting to change, then press OK:
2. Use the Navigation buttons to select a
setting to change, then press OK:
[Enable]: Enable or disable RF
download.
download.
[Auto Upgrade]:Enable or disable
automatic upgrade of the software.
automatic upgrade of the software.
[SW Type]: Specify the type of
software to download.
software to download.
[Program Info]: Specify RF details such
as frequency, modulation and
connection type (cable or aerial).
as frequency, modulation and
connection type (cable or aerial).
[Start upgrade]: Start RF download.
Once the TV has successfully
downloaded the software, it
automatically installs the downloaded
data onto the TV.
Once the TV has successfully
downloaded the software, it
automatically installs the downloaded
data onto the TV.
IP software upgrade
The TV supports software upgrades via IP
(Internet Protocol).
1. In the professional setup menu, select
(Internet Protocol).
1. In the professional setup menu, select
[Clone/Upgrade] > [IP Upgrade].
2. Use the Navigation buttons to select a
setting to change, then press OK:
setting to change, then press OK:
[Enable]: Enable or disable IP upgrade.
[Auto Upgrade]: Enable or disable
automatic upgrade of the software.
automatic upgrade of the software.
[SW Type]: Specify the type of
software to upgrade.
software to upgrade.
[Start upgrade]: Start the upgrade and
display the status page.
display the status page.
Control Express Box
To connect this TV to a setup box, you will
need an Express Box as an interactive
system device. You can control the device
with these settings:
need an Express Box as an interactive
system device. You can control the device
with these settings:
[Software Upgrade]: Upgrade the
software of the connected Express Box
through RF (radio frequency) or from a
connected USB.
software of the connected Express Box
through RF (radio frequency) or from a
connected USB.
[Clone Channels To Special Map]:
Copy all channels from the Native
Channel list to a Hotel Specific Channel
list.
Copy all channels from the Native
Channel list to a Hotel Specific Channel
list.
[SP communication]: Select the
communication protocol between the
Express box and the setup box.
communication protocol between the
Express box and the setup box.
To upgrade the TV software that controls
hotel-specific features with the connected
Express Box (sold separately).
1. In the professional setup menu, select
hotel-specific features with the connected
Express Box (sold separately).
1. In the professional setup menu, select
[Express Box]> [Software Upgrade].
2. Use the Navigation buttons to select a
setting to change, then press OK.
2. Use the Navigation buttons to select a
setting to change, then press OK.