Philips HX9112/02 Manual De Usuario

This process is not reversible.

To remove the rechargeable battery, you need a 

flat-head (standard) screwdriver. Observe basic 

safety precautions when you follow the procedure 

described below. Be sure to protect your eyes, hands, 

fingers, and the surface on which you work.

 1 

 Remove the toothbrush from the charger, 

switch it on and let it operate until it stops. 

Continue to switch on the Sonicare until the 

battery is completely empty.

 2 

 Insert a flathead (standard) screwdriver into 

the slot located at the bottom of the handle. 

Turn the screwdriver anticlockwise to release 

the bottom cap. 

 3 

 Place the handle on a solid surface with the 

buttons facing up and lightly tap the housing 

2.5cm from the bottom edge with a hammer.

 4 

 Hold the handle upside down and push 

down on the shaft to release the internal 

components of the handle.

 5 

 Insert the screwdriver under the circuit board, 

next to the battery connections, and twist to 

break the connections. Remove the circuit 

board and pry the battery from the plastic 

carrier.

19