Philips SFF6135D/GBB Manual De Usuario

Deactivating Automatic Fax Printout

You can secure your fax reception with a code. In that
case, incoming faxes are not printed out, but rather are
stored in the fax memory. Only after entering a PIN
code can you print out these fax transmissions.

Function not available

Default Access Code

1 Press 

C, 4033 and OK.

2 Enter a four-digit PIN code.

3 Confirm with 

OK.

4 Enter the code again for confirmation purposes.

5 Confirm with 

OK.

1 Press 

C, 4032 and OK.

2 Enter the four-digit PIN code.

3 Confirm with 

OK.

4 Use 

[ to select whether you would like to turn the

function on or off.

5 Confirm with 

OK.

1 Press 

C, 4031 and OK.

2 Enter the four-digit PIN code.

3 Confirm with 

OK. The stored fax transmissions are

printed out and deleted from the memory.

Polling Faxes

With the fax polling function, you can retrieve faxes that
lie ready in the dialled device. 

1 Press 

C, 42 and OK.

2 Enter the desired number using the numeric keypad

or select a saved entry.

3 Press 

o.

1 Press 

C, 42 and OK.

2 Enter the desired number using the numeric keypad

or select a saved entry.

3 Confirm with 

OK.

4 Enter the time, at which the document should be

polled, e.g. 

14 00 for 2 pm.

5 Confirm with 

OK.

6 The device is now in standby mode. You can con-

tinue to carry on telephone conversations or send
other fax transmissions during this time.

Deleting a Job SFL 2

Introduction

All messages that have just been sent, that have been
prepared for polling or that are to be sent or polled at
a later time are present in the jobs list.

Display

Jobs appear in the display one-at-a-time. After the job
number and job status indicator, you will find the fax
number to which a fax is to be sent or from which it is
to be polled. Documents on the jobs list can fall into the
following categories with regard to their status:

Jobs 1

TX—Time-Deferred Sending

Jobs 3

POL—Time-delayed Fax Polling

Jobs 4

TR—Job in progress

Stop

1 Press 

C, 71 and OK.

2 Using 

[ select the job that you would like to exe-

cute immediately.

3 Confirm with 

OK. The transmission or polling will

commence immediately.

You cannot use the Protected Fax Reception
and Receive Fax on USB Storage Medium func-
tions at the same time.

The function is switched off with the factory-
installed access code (

0000). Change the

access code to switch on the function. If you
want to switch the function off enter the fac-
tory-installed code 

0000 again.

If you have already saved a code, the device
will ask you to provide the old code first
before you can enter a new code.

To terminate the polling readiness, simply
delete the document from the jobs list (also
see chapter Jobs, page 48).

Press 

j to close the menu and return to the

starting mode.