Philips SFF6135D/GBB Manual De Usuario

Updating Firmware

Updating Firmware

The firmware defines the basic functions and capabilities
of your device. Sometimes also referred to as the device
driver. We constantly strive to implement improve-
ments and innovations. Check our homepage
www.sagemcom.com for information on the current
firmware version available for your device.

Do not interrupt power supply 

Settings will be Deleted

1 Load the firmware from the specified internet page

and save the file directly in the root directory of the
USB storage medium (= highest directory level). The
file shall not be saved in a folder.

2 Connect the USB storage medium with the firmware

file to the USB host connection port.

3 If the device detects the firmware file, a message

appears on the display. Press 

o to update firmware.

4 This process can take a few minutes. The devices re-

boots twice. On completion of the procedure, the
device starts the initial installation process (see also
section Initial installation, Page  16).

Removing USB Storage Media!

Toner Level Memory

Your device registers the extent of toner used for every
print-out and calculates the toner level of the toner car-
tridge on that basis. The toner level is stored in each
toner cartridge. You can use different toner cartridges
as well as display the respective toner level of the toner
cartridge.

Toner Cartridge 3

Use Original Consumable Materials!

You can also edit the device firmware with the
device's web interface (see also the chapter
Web Interface, page  20).

Do not switch the device off during the print
process and do not unplug the device from
the power supply. If the Firmware update is
not carried out error-free, your device will
probably no longer function properly.

Wait until the firmware update is completed
before performing more operations on your
device.

By implementing the Firmware update, all
changed settings on the device are deleted
and restored to factory settings.

When carrying out a Firmware update only
use the Firmware file for your device from
the website: www.sagemcom.com. Using
other Firmware files can lead to your
device not functioning properly. Sagem-
com accepts no liability for device malfunc-
tions which can be traced back to the use
of third party Firmware.

Never pull out the storage medium while the
device is accessing it. If the Firmware update
is not carried out error-free, your device will
probably no longer function properly.

Never open a toner cartridge. If toner dust is
released into the air, you should avoid allow-
ing it to contact your skin and eyes. Do not
inhale the released toner dust. Remove the
toner dust from clothing or objects with cold
water; hot water would only cause the toner
to set. Never remove loose toner dust with a
vacuum cleaner.

Use only original consumable materials. These
are available from a specialised retailer or
through our order service. Other consumable
materials can cause damage to the device.