Bunn BTX-B Manual De Usuario

Descargar
Página de 15
4
Initial Set Up Guide
1.  Slide empty funnel into funnel guides 
as shown.
2.  Fill decanter with cold water. Swivel 
or lift brewer lid and pour water into 
brewer. Position decanter on base 
below funnel. Close the lid and wait 
three minutes while the internal tank 
partially fills.
3.  Open the lid. Remove decanter and 
fill with cold water 
again. Pour water 
into brewer. Position decanter on base 
under funnel and close the lid.
4.  Wait until water flows from the funnel. 
When water flow stops, pour out 
any water that has collected in the 
decanter. Replace decanter on brewer 
below the funnel.
5.  Now, plug in the brewer.
6.  Press the bottom of the vacation switch, 
located on the side of the brewer, to turn 
unit on (Press 
I to turn on and press O 
to turn off.) Wait 15 minutes for the water 
in the tank to heat. 
See steps on page 5 for brewing perfect coffee. 
NHBX
BTX/BX/GRX
IMPORTANT:
Brewer is NOT ready to plug in until you have followed  
the steps below.  Do NOT plug in brewer until step #5.
 
U N N