Indesit DIM51K.AIXGB Guía Del Usuario

Descargar
Página de 16
4
GB
Connecting the power supply cable to the mains.
Fit a normalized plug to the cable, which corresponds 
to the load indicated on the data plate; if the cooker is 
connected directly to the mains, an omnipolar circuit-
breaker with a minimum opening of 3 mm between the 
contacts, suitable for the load indicated and complying 
with current directives, must be installed between the 
appliance and the mains (the earthing wire must not be 
interrupted by the circuit-breaker). The power supply 
cable must be positioned so that it does not exceed 
room temperature by 50°C at any point of its length. 
Before making the connection check that:
•  the circuit breakers or fuses of the home system can 
support appliance load (see data plate);
•  the power supply system has an efficient earthing 
connection which complies with the provisions of 
current regulations and the law;
•  there is easy access to the socket or the omnipolar 
circuit-breaker once the cooker has been installed.
!
 do not use reducers, adapters or shunts as these 
could cause heating or burning.
Connection n° 2
Disposing of the plug.
! THIS APPLIANCE MUST BE EARTHED.
Ensure that before disposing of the plug itself, 
you make the pins unusable so that it cannot be 
accidentally inserted into a socket. Instructions for 
connecting cable to an alternative plug:
!
 the wires in the mains lead are coloured in 
accordance with the following code:
Green & Yellow   -Earth
Blue 
 
  -Neutral
Brown 
  -Live
If the colours of the wires in the mains lead do not 
correspond with the coloured markings identifying the 
terminals in your plug, proceed as follows.
Connect Green & Yellow wire to terminal marked “E” or 
6 or coloured Green or Green & Yellow.
Connect Brown wire to terminal marked “L” or coloured 
Red. Connect Blue wire to terminal marked “N” or 
coloured Black. If a 13 amp plug (BS 1363) is used it 
must be fitted with a 13 amp fuse.
A 15 amp plug must be protected by a 15 amp fuse, 
either in the plug or adaptor or at the distribution 
board.If you are in any doubt about the electrical 
supply to your machine, consult a qualified electrician 
before use.
How to connect an alternative plug
The wires in this mains lead are coloured in 
accordance with the 
following code:
BLUE “NEUTRAL” 
(N)
BROWN “LIVE”  (L)
GREEN AND YELLOW  
“EARTH” (E)
Disposing of the 
appliance
When disposing of 
the appliance please 
remove the plug by cutting the mains cable as close 
as possible to the plug body and dispose of it as 
described above.
! The plug and socket must be easily accessible.
GREEN &
YELLOW
BROWN
BLUE
13 amp fuse
CROSS-BAR
CORD GRIP
! VERY HOT SURFACES
YOU MUST KEEP THE OVEN 
AND GRILL CAVITIES CLEAN
FOOD OR GREASE ON THESE 
SURFACES COULD CAUSE 
SMOKE AND POSSIBLY EVEN BURN
! ATTENTION
WHEN USING THE MAIN OVEN 
YOU MUST ENSURE THAT THE 
BASE OF THE CAVITY IS NOT 
COVERED WITH ALUMINUM 
FOIL, UTENSIL OR ANY OTHER 
FORM OF COVERING. FAILURE 
TO DO THIS MAY RESULT IN 
THE CAVITY BEING DAMAGED. 
! ATTENTION
! ATTENTION
! VERY HOT SURFACES
! VERY HOT SURFACES
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24