Indesit FIMDE23IXS Guía Del Usuario

Descargar
Página de 40
GB
2
Safety Information
• WARNING: The appliance and its
accessible parts become hot
during use.
• Care should be taken to avoid
touching heating elements.
• Children less than 8 years of age
shall be kept away unless
continuously supervised.
• This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance in
a safe way and understand the
hazards involved. Children shall
not play with the appliance.
Cleaning and user maintenance
shall not be made by children
without supervision
• During use the appliance becomes
hot. Care should be taken to avoid
touching heating elements inside the
oven.
• WARNING: Accessible parts may
become hot during use. Young
children should be kept away.
• Do not use harsh abrasive cleaners
or sharp metal scrapers to clean the
oven door glass since they can
scratch the surface, which may result
in shattering of the glass
• When cleaning the appliance do not
use steam cleaner.
• WARNING: Ensure that the
appliance is switched off before
replacing the lamp to avoid the
possibility of electric shock
• The appliance is not intended to be
operated by means of an external
timer or separate remote-control
system.
! ATTENTION 
DURING INSTALLATION 
THE FEET OF THE APPLIANCE
MUST BE LOWERED SO THAT
AN AIR GAP OF AT LEAST
10MM (1CM) IS LEFT BETWEEN 
THE BASE OF THE APPLIANCE 
AND THE FLOOR.
! VERY HOT SURFACES
YOU MUST KEEP THE OVEN 
AND GRILL CAVITIES CLEAN
FOOD OR GREASE ON THESE 
SURFACES COULD CAUSE 
SMOKE AND POSSIBLY EVEN BURN
! ATTENTION
WHEN USING THE MAIN OVEN 
YOU MUST ENSURE THAT THE 
BASE OF THE CAVITY IS NOT 
COVERED WITH ALUMINUM 
FOIL, UTENSIL OR ANY OTHER 
FORM OF COVERING. FAILURE 
TO DO THIS MAY RESULT IN 
THE CAVITY BEING DAMAGED. 
10 mm
! ATTENTION
! ATTENTION
! ATTENTION 
! ATTENTION 
! VERY HOT SURFACES
! VERY HOT SURFACES
•    
! When you place the rack inside, 
make sure that the stop is directed 
upwards and in the back of the cavity.