HP ProLiant ML330 G6 Special Tower Server 517607-425 Manual De Usuario

System Unit

Tower Dimensions
(H x W x D)
(W/O foot stand)

7.87 x 16.81 x 24.13 in (200 x 427 x 613 mm)

Tower Weight
(approximate)

Maximum:
(All hard drives, power
supplies and processors
installed)

30 kg

Minimum:
(One hard drive, power
supply and processor
installed)

16 Kg

Input Requirements
(per power supply)

Rated Line Voltage

100 to 240 VAC

Rated Input Current

7.1 Amps (at 120VAC) to 3.5 Amps (at 240
VAC)

Rated Input Frequency

50 to 60 Hz

Rated Input Power

852 W

BTU Rating

Maximum

460W - 1773 BTU / hr (at 120 VAC), 1715
(at 240 VAC)
750W - 2892 BTU / hr (at 120 VAC), 2797
(at 240 VAC)
1200W - 3530 BTU / hr (at 120 VAC), 4600
(at 240 VAC)

Power Specifications

To review typical system power ratings use the Power Calculator which is
available via the online tool located at URL: 

- Click on the system of interest. Example: ML330 G6
- Follow the instructions of the next screens.

Power Supply Output
(per power supply)

Rated Steady-State Power 460 (750) W (at 100 VAC),

460 (750) W (at 200 VAC)

Maximum Peak Power

460 (750) W (at 100 VAC),
460 (750) W (at 200 VAC)

NOTE: See Power Supply Specifications tables
for complete details on 460W PSU and optional
750W.

System Inlet Temperature

Operating

50° to 95° F (10° to 35° C) at sea level with an
altitude derating of 1.8°F per 1,000 ft (1.0° C
per every 305 m) above seal level to a maximum
of 10,000 ft (3050 m) no direct sustained
sunlight . Maximum rate of change is 18°F/hr
(10°C/hr). The upper limit may be limited by the
type and number of options installed. System
performance may be reduced if operating with a
fan fault or above 86°F (30°C).

Non-Operating

-22° to 140° F (-30° to 60° C)

Relative Humidity
(non-condensing)

Operating

10% to 90% relative humidity (Rh), 82.4°F
(28°C) maximum wet bulb temperature, non-
condensing.

QuickSpecs

HP ProLiant ML330 Generation 6

Technical Specifications

DA - 13361   Worldwide QuickSpecs — Version 5 — 7.13.2009

Page 38