Indesit KG6407XG/G Manual De Usuario
5
b) Oven burner
•
Remove the floor of the oven (Fig. E), unscrew screw
“A” holding the burner in place (Fig. F), lift and shift the
burner from the centering connector.
“A” holding the burner in place (Fig. F), lift and shift the
burner from the centering connector.
Fig. E
•
Loosen screw “B” and slide the air regulation hose,
making sure that it does not fall inside the burner hose
(Fig. F). For some typees of gas, the hose must be
turned upside down.
making sure that it does not fall inside the burner hose
(Fig. F). For some typees of gas, the hose must be
turned upside down.
•
Unscrew the nozzle and replace it with that suitable
for the new gas as supplied with the cooker in
accordance with table 2.
for the new gas as supplied with the cooker in
accordance with table 2.
•
To regulate the amount of air to the burner, use the
values indicated in table 1 “Air Regulation for Burners.”
Once the adjustment is made, fix hose “C” with the
screw “B” (Fig. F).
values indicated in table 1 “Air Regulation for Burners.”
Once the adjustment is made, fix hose “C” with the
screw “B” (Fig. F).
C
B
D
A
Fig. F
c) Grill burner
•
Unscrew screw “D” and remove burner from centering
connector (Fig. F).
connector (Fig. F).
•
Loosen screw “B” and slide the air regulation hose,
making sure that it does not fall inside the burner hose
(Fig. F). For some typees of gas, the hose must be
turned upside down.
making sure that it does not fall inside the burner hose
(Fig. F). For some typees of gas, the hose must be
turned upside down.
•
Unscrew the nozzle and replace it with that suitable
for the new gas as supplied with the cooker in
accordance with table 2.
for the new gas as supplied with the cooker in
accordance with table 2.
•
To regulate the amount of air to the burner, use the
values indicated in table 1 “Air Regulation for Burners.”
Once the adjustment is made, fix hose “C” with the
screw “B” (Fig. F).
values indicated in table 1 “Air Regulation for Burners.”
Once the adjustment is made, fix hose “C” with the
screw “B” (Fig. F).
Table 1
Regulating air "a" (mm)
Burner
Butane
Propane
Natural
Gas G20
Fast large
(Front right)
(Front right)
Fast
(Rear left)
(Rear left)
Medium
(Rear right)
(Rear right)
Medium
(Front left)
(Front left)
11
13
13
13
0
0
0
0
Oven burner
Grill burner
(Side A) 1
(Side A) 1
(Side B) 0
(Side A) 0
2) Minimum regulation
When installing the cooker make sure that the minimums
of al upper burners are duly regulated. Regulation of
minimus is essential when changing the type of gas.
of al upper burners are duly regulated. Regulation of
minimus is essential when changing the type of gas.
a) Upper burners
•
Taking one burner at a time, switch on to the maximum
position.
position.
•
Remove the knob, insert the special screwdriver into
the hole of the tap rod and slightly unscrew to regulate
the minimum (Fig. G). It the tap rod hasn’t the hole
insert a screwdriver into the hole of the facia panel
and slightly unscrew “S” screw to regulate the minimum
(Fig. G bis).
the hole of the tap rod and slightly unscrew to regulate
the minimum (Fig. G). It the tap rod hasn’t the hole
insert a screwdriver into the hole of the facia panel
and slightly unscrew “S” screw to regulate the minimum
(Fig. G bis).
•
Then turn the tap to minimum position.
•
Rotate to the left to increase the flame and rotate to
the right o lower the flame.
the right o lower the flame.
S
M
T
Fig. G
b) Oven
•
Remove the bottom rack from the oven.
•
Turn the oven burner on and leave it on maximum for
about 10 minutes with the oven door closed.
about 10 minutes with the oven door closed.
Fig. G bis
a
A
B
a