Allied Telesis AT-CV5000 Manual De Usuario
Chapter 1: Overview
22
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
These default settings are for a DEC VT100 or ANSI terminal, or an
equivalent terminal emulation program.
equivalent terminal emulation program.
Interface Card
LEDs
Table 1 lists the system status LEDs located on the LED interface card.
Table 1. Status LEDs on the LED Interface Card
LED
State
Description
RDY
(For future use)
(For future use)
Green
The module installed in the rear
expansion slot has passed
diagnostics and is ready.
expansion slot has passed
diagnostics and is ready.
OFF
The module installed in the rear
expansion slot has failed diagnostics
and is not ready, or is not installed.
expansion slot has failed diagnostics
and is not ready, or is not installed.
MSTR
(For future use)
(For future use)
Green
This AT-CV5000 chassis is acting as
a Stacking Master (via a module
installed in the rear expansion slot.)
a Stacking Master (via a module
installed in the rear expansion slot.)
OFF
This AT-CV5000 chassis is not a
Stacking Master.
Stacking Master.
FLT
(For future use)
(For future use)
Green
The module installed in the rear
expansion slot has a fault condition, or
is not installed.
expansion slot has a fault condition, or
is not installed.
OFF
The module installed in the rear
expansion slot has not reported a fault
condition.
expansion slot has not reported a fault
condition.
PS-A
Green
The power supply in slot A is
operating normally.
operating normally.
OFF
The power supply in slot A is OFF, not
present, or has failed.
present, or has failed.
PS-B
Green
The power supply in slot B is
operating normally.
operating normally.
OFF
The power supply in slot B is OFF, not
present, or has failed.
present, or has failed.