Allied Telesis AT-CV5000 Manual De Usuario
Chapter 1: Overview
32
Fan Modules
The AT-CVFAN module, as shown in Figure 10, is designed for use with
the AT-CV5000 chassis. You can install the same fan module in either fan
slot labeled A or B, located at the rear of the AT-CV5000 chassis. For
proper operation, two AT-CVFAN modules are preinstalled in the
AT-CV5000 chassis.
the AT-CV5000 chassis. You can install the same fan module in either fan
slot labeled A or B, located at the rear of the AT-CV5000 chassis. For
proper operation, two AT-CVFAN modules are preinstalled in the
AT-CV5000 chassis.
Caution
The AT-CVFAN modules are field-replaceable; however, they are
not hot-swappable. Therefore, make sure to power OFF the chassis
before replacing the fan modules.
not hot-swappable. Therefore, make sure to power OFF the chassis
before replacing the fan modules.
Note
The AT-CV5000 chassis operates correctly even with one faulty fan
module. However, it will not operate correctly if one fan is missing
because this changes the air flow.
module. However, it will not operate correctly if one fan is missing
because this changes the air flow.
Figure 10. AT-CVFAN Module
Figure 11 illustrates the locations of the two fan modules at the rear of the
AT-CV5000 chassis.
AT-CV5000 chassis.
Figure 11. Locations of Fan Slots A and B on an AT-CV5000 Rear Panel
To replace a fan module if one of the two AT-CVFAN modules failed, refer
to “Replacing an AT-CVFAN Module” on page 86.
to “Replacing an AT-CVFAN Module” on page 86.
A
T
-CVF
AN
201
A
B
A
T-CVF
AN
A
A
T-CVF
AN
B
214
REAR EXP. SLOT
100-240VAC
~
WARNING
This unit might have more than one power input. To
reduce the risk of electric shock, disconnect all power
inputs before servicing unit.
reduce the risk of electric shock, disconnect all power
inputs before servicing unit.
100-240VAC
~
WARNING
This unit might have more than one power input. To
reduce the risk of electric shock, disconnect all power
inputs before servicing unit.
reduce the risk of electric shock, disconnect all power
inputs before servicing unit.
Fan Slot A
Fan Slot B