Allied Telesis AT-CV5000 Manual De Usuario

Chapter 2: Installation

54

8. Use a Phillips screwdriver to tighten the captive screw on the line card, 

Figure 26. Tightening the Captive Screw

Always tighten the captive screw to secure the line card to the 
chassis. 

If you purchased an AT-CV5M01 Management Card for the chassis, 
go to “Working with the AT-CV5M01 Management Card” on page 76. If 
you purchased additional line cards, repeat this procedure to install the 
card. Otherwise, go to “Cabling a Converteon™ Line Card in an 
AT-CV5000 Chassis” on page 55.

249