Allied Telesis AT-CV5000 Manual De Usuario

Chapter 3: Working with Line Cards and other Modules

84

The AT-CV5000 chassis is shipped with two slots in the rear designated 
for the power supplies, but without any power supplies installed. You must 
install at least one power supply in order to power on the chassis.

The AT-CV5000 Media Converter chassis can contain two power 
supplies of the same type (AC or DC) or a combination of the two 
types with the same power ratings. Make sure not to mix power 
supplies with different power ratings in the same chassis.

For information on the power supply module, refer to the 
documentation that is shipped with the module.

You can install an additional AT-PWR15 DC power supply while the 
existing power supply is powered ON.

To install an AT-PWR15 DC power supply, perform the following 
procedure:

1. Remove the AT-PWR15 DC power supply from its shipping package 

and store the package in a safe place. 

You must use the original package if you need to return the unit to 
Allied Telesis.

2. Select the power supply slot in the AT-CV5000 chassis where you 

want to install the AT-PWR15 DC power supply.

3. Turn the power switch OFF.

4. Remove any slot cover that may be covering that slot.