Allied Telesis AT-CV5000 Manual De Usuario

Chapter 3: Working with Line Cards and other Modules

92

The AT-CV5PNL2 blank slot cover is designed to cover any unoccupied 
power supply module slots in the AT-CV5000 chassis model only.

To install an AT-CV5PNL2 blank slot cover, perform the following 
procedure:

1. Remove the AT-CV5PNL2 blank slot cover from its shipping package 

and store the package in a safe place. 

You must use the original package if you need to return the unit to 
Allied Telesis.

2. Select the power supply slot in the AT-CV5000 chassis where you 

want to install the blank slot cover.

3. Align the back edge of the blank slot cover with the alignment guides 

located inside the slot.

4. Slide the blank slot cover into the slot, as shown in Figure 68, until the 

slot cover is flush with the front of the chassis.

Figure 68. Inserting an AT-CV5PNL2 Blank Slot Cover

5. Use a Phillips screwdriver to tighten the captive screws, as shown in 

Figure 69. Tightening the Captive Screws on an AT-CV5PNL2

226

273