Toshiba Z930-S9311 Manual De Usuario

106

This utility can be used to enable or disable the USB Sleep and 
Charge function. To enable this function, select Enable. To disable 
this function, toggle the Enable button to the Disabled position.

You can also control whether charging takes place when the 
computer is running on battery power. To do so, select or de-select 
the Enable under Battery Mode check box in the utility.

If you enable charging when the computer is running on battery 
power, you can specify that charging stops when battery power 
drops below a certain level. Use the slider at the bottom of the 
utility window (beneath the “Lower limit of remaining battery life” 
heading) to specify when charging should stop. For example, if you 
set the slider to 10%, charging will stop when 10% or less of the 
battery power remains.

Your computer may provide two different charging modes, to 
support various types of USB devices. If your computer provides 
more than one charging mode, the charging mode you should select 
depends on the USB device you want to charge. For example, Auto 
Mode, which is the default mode, will charge a wide variety of 
digital audio players. If your device does not charge in Auto Mode, 
try using High Current Mode. To select a different charging mode, 
use the Power supply mode drop-down list in the utility.

With certain external devices, the USB Sleep and Charge function 
may not work no matter which charging mode you select. In those 
cases, disable USB Sleep and Charge in the utility and turn the 
computer on to charge the device, or use a different charging device.