Epson EB-Z9900W Manual De Usuario

Check

Remedy

Did you press the [

] button?

Press the [

] button to turn on the power.

Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cord, or the power cord may be defective. Reinsert the power cord. If this

does not solve the problem, stop using the projector, disconnect the power cord from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.

s

Is the Control Panel Lock set to Full Lock?

Press the [

] button on the remote control. If you do not want to use Control Panel Lock, change the setting to

.

s

 "Control Panel Lock" 

Is the correct setting for the remote receiver selected?

Check the remote receiver in the Configuration menu.

s

 Settings - Remote Receiver 

Was the power cord plugged back in or was the breaker turned on
immediately after direct power off?

When one of the operations to the left is performed when Direct Power On is set to On, the power may not turn back on.
Press the [

] button on the remote control or the control panel to turn on the projector.

Is the [ID] switch on the remote control set to On?

When the switch is set to On, you can use the remote control to operate only a projector with a matching ID. Set the [ID]
switch to Off.

s

Are the lamp cover and lamps attached correctly?

If the lamp or lamp cover is not attached correctly, the projector cannot be turned on. Check that they are attached
correctly.

s

 "How to replace the lamp"