Hitachi CG 22EAD(SL) Manual De Usuario

8

Attach the protection tube to the drive shaft or handle 

using cord clamps (8). (Fig. 5)

8

Fig. 5

  If the protection tube is set apart from the handle 

or pipe, it will be caught by something during 

operation and it may cause serious injury. Do not 

set the protection tube apart from the handle or 

pipe.

Press the upper tab (9) and open the air cleaner 

cover. (Fig. 6) 

9

Fig. 6

Connect stop cords. (Fig. 7)

Fig. 7

If the throttle outer end (10) is threaded on your unit, 

screw it and the earth terminal (11) (if so equipped) 

into the cable adjuster stay (12) all the way, and then 

tighten this cable end using the adjuster nut (13) 

against the cable adjuster stay (12).

Connect throttle wire end (14) to carburetor (15) 

and install swivel cap (16) (if so equipped) where is 

included in tool bag, onto swivel (15) (Fig. 8).

Some models may come with the parts installed.

11

12

10

13

14

15

16

Fig. 8

Fig. 9

Fig. 10

Fig. 10-1

000Book_CG22EAS_US.indb   8

000Book_CG22EAS_US.indb   8

2010/01/14   9:49:37

2010/01/14   9:49:37