Xantrex Technology C40R/50 Manual De Usuario

975-0123-01-01 Rev A

7

The following sections describe how to install the 

C-Series Meter 

Display

. They include detailed instructions for the following steps.

1. Jumper Installation (Step 1): Set the voltage setting on the 

faceplate or remote to match the system voltage by installing the 

jumper over the appropriate pins. This step is critical to the proper 

operation of the unit.
See 

 for instructions. 

2. Cable Installation (Step 2): Connect the display to the C-Series 

controller using the communications cable. 
See 

 for instructions.

3. Faceplate/Remote Installation (Step 3): Determine the location 

and mounting method for the remote (if used). 
See 

 for instructions.

The green and red color of the LED only indicates the 

particular operating mode and the battery voltage level. It does not 
indicate whether the charging source is functioning properly.