Xantrex Technology C40R/50 Manual De Usuario

18

975-0123-01-01 Rev A

To manually reset the amp-hour meter, press and hold the push-button 
on the front of the meter until the display resets.
The meter automatically resets if power is disrupted (for example, DC 

cable is removed and replaced).

Press and release the Amp-hour Reset button to turn the backlight 
on or off. 

If using long cable runs on the remote (greater than 100 feet) or if the 

meter seems inaccurate, remove the jumper located below the voltage 
configuration pins on the circuit board on the back of the unit. This dims 

the LCD backlight, reduces power consumption, and improves meter 

accuracy.
See the Owner’s Manual for the C-Series Multifunction DC Controller 

for additional information about Troubleshooting.