Panasonic KX-TG2583ALS Manual De Usuario

Needs to be recharged.

Place the handset on the base unit
and charge for about 6 hours before
initial use.

•The IN USE/CHARGE indicator lights and

a beep sounds. 

You can check the battery strength on the handset display while the
handset is on the base unit, while it is in use (making/answering a call
etc.), or after viewing the Caller List or directory items, programming etc.
The battery strength will remain for a few seconds after using the
handset, then the display will return to the standby mode (p. 9).

The battery strength is as shown in the chart below.

Fully charged

Medium

Low

(flashing)

IN USE/CHARGE
Indicator 

Recharge the battery when:
—“Recharge battery” is displayed on 

the handset,

—“

” flashes on the display, or

—the handset beeps intermittently while it is in use.

•If you DO NOT recharge the handset battery for more than 15 minutes, the

display will keep indicating “Recharge battery” and/or “

” will continue

to flash. 

•To fully recharge the battery, the handset should be left on the base unit for 6

hours.

Recharge battery