Panasonic KX-TG2551ALS Manual De Usuario
13
Preparation
Selecting the Line Mode
If the line is connected to a low voltage system such as a PBX, set to “B”.
Otherwise the Call Waiting Caller ID Feature may not function (p. 41).
Your phone comes from the factory set to “A”.
Use the handset near the base unit.
Make sure the handset is in the standby mode initially.
Otherwise the Call Waiting Caller ID Feature may not function (p. 41).
Your phone comes from the factory set to “A”.
Use the handset near the base unit.
Make sure the handset is in the standby mode initially.
1
Press
(FUNCTION/EXIT/CH)
.
2
Press
Ö
or
Ñ
repeatedly until the arrow
points to “Program”.
3
Press
FWD/EDIT á
(Yes key).
4
Press
Ö
or
Ñ
repeatedly until the arrow
points to “Set line mode”.
5
Press
FWD/EDIT á
(Yes key).
6
Press
Ö
or
Ñ
to select “B” or “A”.
7
Press
FWD/EDIT á
(Save key).
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•If the handset has lost communication with the base unit, 3 beeps sound and “No
link to base Place on cradle and try again.
” is displayed.
H
Set line mode
Talk switching
Talk switching
GF
H
=Yes
Line mode
:A
GF
H
=Save
Line mode
:B
Line mode
:B
GF
H
=Save
H
Save directory
Ringer volume
Ringer volume
GF
H
=Yes
H
Program
LCD contrast
LCD contrast
GF
H
=Yes
H
Save DIRECT#
Recall time
Recall time
GF
H
=Yes