Intel Desktop Board DG41RQ, 10-Pack BLKDG41RQ-1OPACK Manual De Usuario

 

67

 

In the BIOS Setup program, the user can choose to boot from a diskette drive, hard 
drive, USB drive, USB flash drive, CD-ROM, or the network.  The default setting is for 
the diskette drive to be the first boot device, the hard drive second, and the ATAPI 
CD-ROM third.  The fourth device is disabled. 

Booting from CD-ROM is supported in compliance to the El Torito bootable CD-ROM 
format specification.  Under the Boot menu in the BIOS Setup program, ATAPI 
CD-ROM is listed as a boot device.  Boot devices are defined in priority order.  
Accordingly, if there is not a bootable CD in the CD-ROM drive, the system will attempt 
to boot from the next defined drive. 

The network can be selected as a boot device.  This selection allows booting from the 
onboard LAN or a network add-in card with a remote boot ROM installed. 

Pressing the <F12> key during POST automatically forces booting from the LAN.  To 
use this key during POST, the User Access Level in the BIOS Setup program's Security 
menu must be set to Full. 

For use in embedded applications, the BIOS has been designed so that after passing 
the POST, the operating system loader is invoked even if the following devices are not 
present: 
•  Video adapter 
•  Keyboard 
•  Mouse 

Pressing the <F10> key during POST causes a boot device menu to be displayed.  This 
menu displays the list of available boot devices (as set in the BIOS setup program’s 
Boot Device Priority Submenu).  Table 34 lists the boot device menu options. 

Description 

<↑> or <↓> 

Selects a default boot device 

<Enter> 

Exits the menu, saves changes, and boots from the selected 
device 

<Esc> 

Exits the menu without saving changes