Generac Power Systems 009600-5 Manual De Usuario
Generac
®
Power Systems, Inc. 25
Section 6 – Installation
PRIMEPACT 66G and 66LP Recreational Vehicle Generators
• Vapor seal all compartment seams and joints.
• Over the galvanized steel lining, install a combination
• Over the galvanized steel lining, install a combination
of acoustical materials as mentioned in Section 6.2.3.
To prevent fire or explosion, do not install any
insulation or other absorbent materials on the
interior or underside of the compartment floor.
insulation or other absorbent materials on the
interior or underside of the compartment floor.
• Seal all compartment door edges to prevent noise
leakage around the door perimeter.
• Line the compartment door interior (except for air
openings) with suitable, fireproof sound insulation
(such as 1-inch (25 mm) thick fiberglass with a 2-
pound density).
(such as 1-inch (25 mm) thick fiberglass with a 2-
pound density).
Figure 6.7 – Typical Noise Abatement
Figure 6.8 — Compartment Floor Cutout