Alesis 12 FireWire Manual De Usuario

Descargar
Página de 64
 
Introduction
 
 
 
Multichannel Firewire (IEEE 1394a) input and output 
– routes each individual channel’s output, plus the MAIN 
outputs, through the FIREWIRE port, and receives two 
channels back from the computer, all in 24-bit, 44.1/48 
kHz digital audio.   
ASIO and WDM computer drivers – lets you use the 
MultiMix FireWire with the vast majority of  digital audio 
workstation programs. 
Clean and powerful preamps – up to 50dB of  preamp 
gain for capturing quiet sources.  Globally switched 
phantom power. 
Stereo inputs – Two stereo pairs for the MultiMix 8 
FireWire.  Four stereo pairs for the 12- and 16-channel 
versions.  Great for line-level instruments. 
Internal digital effects processor with 100 preset 
effects and an easy-to-read display – includes a variety 
of  reverbs, delays, choruses, flanges, a pitch transposer and 
multiple combinations of  these. 
3-band EQ per channel – a potent tool for sonically 
shaping each channel to get that perfect mix. 
2 aux sends per channel – one can be used to access an 
external effects device; the other can be used either to 
access the MultiMix’s internal effects or to access a second 
external device.  On the 12-channel and 16-channel 
MultiMix FireWires, the first aux send can be switched 
between either pre- or post-fader operation. 
Control room output level – provides control over the 
separate control room output. 
2-track send and return – lets you mix your audio to tape 
or other media and to add a tape deck or CD player to the 
mix. 
 
 
Additional Features of the MultiMix 12 
FireWire and MultiMix 16 FireWire 
 
PFL/Solo in place functionality per channel – isolates a 
channel with a single push of  a button. 
Mute/Alt 3/4 assign per channel – lets you mute a 
channel and, at the same time, route its signal to the mixer’s 
ALT 3/4 output—a separate stereo bus. 
Independent Main Mix and Alt 3/4 levels – permits you 
to separately command the levels of  the MultiMix’s two 
stereo buses 
S/PDIF digital out – sends the 24-bit, digital stereo signal 
directly to a DAT, DVD or other recording device that can 
accept a S/PDIF signal.