Polycom EX Manual De Usuario

Integrators’ Reference Manual for ViewStation EX, ViewStation FX, and VS4000

92

www.polycom.com

Do this if you need to use the system to provide LAN connectivity 
for your PC.

Ensure that the PC and the system are both powered off.

Connect the system to the LAN using the LAN connector and 
cable.

Connect the blue RJ-45 cable into the blue PC port on the back 
of the system and to the Ethernet port on your computer. 

Power on the system. 

Select System Info > Admin Setup > LAN/H.323 > 
LAN/Intranet

 to configure the system’s LAN/H.323 settings. 

The LAN & Intranet screen appears.

If your LAN does not use DHCP, go to step 9.

If your LAN uses DHCP, select Client in the DHCP field to 
enable the system to obtain an IP address from a server on your 
network.

After you have changed the DHCP settings, a message lets you 
know that the system will have to be reset in order to save the 
changes. Select Yes. Another message informs you that the 
system is about to restart.

Select the System Info icon to go to the System Information 
screen. Your system's IP address should appear in the IP 
Address

 field. 

You have finished this procedure. The rest of this procedure 
applies to LANs that do not use DHCP.

If the IP address field displays “...waiting...,” the system did not get 
an address from the LAN. Check the LAN connection on the back of 
the system and try again. When the system is properly connected, 
the green light on the connector is illuminated and the orange light 
blinks.