Polycom EX Manual De Usuario
Integrators’ Reference Manual for ViewStation EX, ViewStation FX, and VS4000
84
www.polycom.com
Installation
To install the PRI network interface module:
1.
Ensure that the system is powered off.
2.
Connect peripheral side of the PRI network interface module to
the system using the supplied cable. Figure 4-5 shows the
peripheral side of the PRI network interface module.
the system using the supplied cable. Figure 4-5 shows the
peripheral side of the PRI network interface module.
Figure 4-5.
PRI Network Interface Module (Peripheral Side)
3.
Connect the 12-volt DC power supply to the PRI network
interface module and then to the UPS or wall outlet.
interface module and then to the UPS or wall outlet.
4.
Connect the PRI network interface module to the ISDN
network.
network.
Figure 4-6.
PRI Network Interface Module (Network Side)
You are now ready to power on and configure the system.
Port
(not used)
Input Port
LEDs
Network
Connector
Connector
LEDs