Hoshizaki DCM-751BAH-OS Manual De Usuario
23
Fig. 8
8) Remove the front panel, then remove the storage bin cover.
9) Move the control switch to the "ICE" position.
9) Move the control switch to the "ICE" position.
10) Confirm bin control operation: Remove the control box cover, then engage the safety
switch on the front frame. See Fig. 7. After the "GM" LED on the control board turns
on, bypass the 5-minute compressor startup delay by pressing the "SERVICE" button.
See Fig. 8.
on, bypass the 5-minute compressor startup delay by pressing the "SERVICE" button.
See Fig. 8.
WARNING! Risk of electric shock. Care should be taken not to touch
live terminals. After the compressor starts, press and hold the actuator paddle located
inside the storage bin.
inside the storage bin.
WARNING! Keep hands, hair, and loose clothing clear of the
agitators inside the storage bin. The icemaker should shut down within 10 seconds.
11) Disengage the safety switch. Move the control switch to the "OFF" position, then move
the power switch to the "OFF" position. Turn off the power supply. Replace the control
box cover in its correct position.
box cover in its correct position.
12) Clean the storage bin liner, cover, and components using a neutral cleaner. Rinse
thoroughly after cleaning. Replace the storage bin cover in its correct position.
WARNING! CHOKING HAZARD: Ensure all components, fasteners, and
thumbscrews are securely in place. Make sure that none have fallen into the
storage bin.
WARNING! CHOKING HAZARD: Ensure all components, fasteners, and
thumbscrews are securely in place. Make sure that none have fallen into the
storage bin.
13) Move the power switch to the "ON" position, then replace the front panel in its correct
position. Turn on the power supply, then move the control switch to the "ICE" position to
start the automatic icemaking process.
start the automatic icemaking process.
I. Dispense Mode Switch
The dispense mode switch has "CONTINUOUS" and "PORTION" positions.
When the dispense mode switch is in the "CONTINUOUS" position, ice dispenses
continuously for a maximum of 60 seconds per activation.
When the dispense mode switch is in the "PORTION" position, ice dispenses for the
amount of time determined by the ice dispense time setting. The ice dispense time
control is located on the control board. The dial indicates dispense time in seconds and
is adjustable between 0.6 and 20 seconds. See Fig. 8. When shipped, the ice dispense
time control is set to the minimum dispense time of 0.6 sec. At this setting, approximately
0.72 oz. of ice is dispensed. The DCM-751BAH(-OS) and DCM-751BWH(-OS) dispense
approximately 1.2 oz. of ice per second.
When the dispense mode switch is in the "CONTINUOUS" position, ice dispenses
continuously for a maximum of 60 seconds per activation.
When the dispense mode switch is in the "PORTION" position, ice dispenses for the
amount of time determined by the ice dispense time setting. The ice dispense time
control is located on the control board. The dial indicates dispense time in seconds and
is adjustable between 0.6 and 20 seconds. See Fig. 8. When shipped, the ice dispense
time control is set to the minimum dispense time of 0.6 sec. At this setting, approximately
0.72 oz. of ice is dispensed. The DCM-751BAH(-OS) and DCM-751BWH(-OS) dispense
approximately 1.2 oz. of ice per second.
"SERVICE" Button
"GM" LED
"COMP" LED
Ice Dispense Time Control