GE 42" Manual De Usuario

• Set the Master Power switch to the I (ON)

position.

• Check to make sure power to refrigerator is

on by opening refrigerator door to see if
interior lights are on.

• The temperature controls are preset at 37°

for the Fresh Food section and 0° for the
Freezer section.

• Allow 24 hours to stabilize before making

adjustments.

Raise
Grille
Panel

Water Filter

Master

Power Switch

• Locate and bring GE SmartConnect

™

tubing

to the front of the cabinet.

• Turn the water on to flush debris from line.

Run about a quart of water through tubing
into a bucket, then shut off water.

Copper Tubing
• Slip a 1/4

″ nut and ferrule onto end of

copper tubing. Insert tube into the union
fitting on the unit and tighten nut to union.

• Turn on the water to check for leaks.

• Insert the molded end of the tubing into

the refrigerator connection. Tighten the
compression nut until it is just hand tight.

• Tighten one additional turn with a wrench.

• Turn on the water to check for leaks.

Note: Make sure excess tubing length does
not interfere with toekick installation.

Refrigerator

Water Supply

House

Water Supply