Black Box AC602A Guia De Especificaciones

2 of 3

7/11/2007
#26674

724-746-5500

   blackbox.com

Say goodbye to bulky,  difficult-to-terminate VGA cable.

BLACK BOX

®

Mini CAT5 Extenders enable you to use ordinary

CAT5 UTP cable to connect video monitors up to 500 feet
(152.4 m) from your PC or video source. 

They’re ideal for placing video displays such as monitors

or LCD screens where you need them to display information
such as schedules, menus, or advertising.

The extender transmitters amplify the signal for clean

and crisp transmission, and differential signaling eliminates
ground loops and noise. In the transmission, there’s little or
no degradation of video quality, and they handle resolutions
up to 1600 x 1200 at any refresh rate. The VGA models
work with VGA, SVGA, XGA, and UXGA video.

You can also transport them and install them with ease.

Rugged and reliable, the extender units feature a compact
plastic enclosure that can withstand the daily grind and
frequent plugging and unplugging of cables. 

These are low-cost, single-channel extenders for sending

video signals over CAT5 UTP links. With these kits, you get
a single-channel transmitter and a receiver unit, which work
together to extend the video signal at a long distance. Just
plug a standard CAT5 cable up to 500 feet (152.4 m) long
between the local and remote units. 

The transmitter-extender combo requires only a single

power supply, which can be plugged in at either end of the
link— whichever side is most convenient for you. 

Choose from VGA or Component versions. 
The VGA kit converts a PC’s VGA or signal into a format

that can be transmitted over the CAT5 link, then converts
it back to VGA for connection to your monitor, projector
or other display device.

The transmitter and receiver units in the Component kit

are the same as the VGA model’s, but it has cables for
connecting Component devices at each end. On the
transmitter side, these cables connect to the three RCA
connectors of DVD players or other video sources that output
Component (RGB, Y-Pb-Pr, or Y-Cb-Cr) video. And, on the
receiver side, the cables connect HDTVs, high-end monitor,
and other compatible displays.

This extender transmitter not only sends video up to

500 feet (152.4 m) over CAT5.and enables you to eliminate
bulky VGA cables in your application, it also has a single-gang
wallplate that mounts in any standard junction box — saving
you valuable space and simplifying your installation. 

For this reason, the Mini CAT5 VGA Extender Transmitter

with Wallplate is ideal for crowded video distribution
applications, especially those in which equipment is close 
to a wall. 

The rear of the extender has an RJ-45 connector for CAT5

links, and the front has an HD15 connector for local video
links, as well as a power supply that connects with screw
terminals. 

For receiver-side connections, you’ll need to order the Mini

CAT5 VGA Receiver (AC602A).

This transmitter suits single-channel extensions and

features a local loopthrough HD15 port, which you can use
to attach a VGA monitor for a local display.

And because it supplies “phantom power” over the CAT5

interconnecting link, in most applications, it requires power
at only one end. This can be either through the included

CAT5 Solid-Conductor

Cable

CAT5 Solid-Conductor

Cable 

VGA Cable

VGA Cable

Video Source

Monitor

VGA Monitor

VGA Monitor