Glam Rock gk1000 Guía Del Usuario

4

5

1. Pull out the crown to position III (all three chronograph hands are in their correct or incorrect    

    zero position).

2. Keep pusher 2 and 1 depressed simultaneously for at least 2 seconds (the center stop-second   

    rotates by 360º - corrective mode is activated).

3. Press pusher 2 to single step the center stop-second hand. Press and hold pusher 2 to advance  

    the center stop-second hand quickly. Press pusher 1 to advance the next hand.

4. Press pusher 2 to single step the hour counter hand. Press and hold pusher 2 to advance the  

    hour counter hand quickly. Press pusher 1 to advance to the next hand.

5. Press pusher 2 to single step the minute counter hand. Press and hold pusher 2 to advance the       

    minute counter hand quickly.

6. Return the crown to position I.

Hour hand   

Minute hand 

Second hand  

Crown  

Date  

Hour counter  

Center 

stop-second  
Minute counter  

Pusher 1 

(reset)  
Pusher 2 

(star/stop)

PLEASE NOTE :

Before using the chronograph functions, please ensure that :

- the crown is in position I (=normal position).

- the three chronograph hands are precisely at zero position following activation of pusher 1. Should this not be the case, 

   the position of the hands must be adjusted (see the chapter entitled “Adjusting the chronograph hands to zero position”).

(Start / Stop / Reset)

1. Press pusher 2 to start the center stop-second hand.

2. To stop the timing, press pusher 2 again.

3. To reset the three chronograph hands to zero positioning, press pusher 1.

1. Press pusher 2 to start the center stop-second hand.

2. Press pusher 1 to stop the chronograph.

    NOTE: Although the chronograph hands have stopped, the movement continues 

              to record the current timing.

3. Make up the measured time: Press pusher 1 again and the 3 chronograph hands are quickly advanced to the ongoing    

    measured time. To continue to record intervals, continue to push pusher 1.

4. Press pusher 2 to stop and the final time is displayed.

5. To reset the three chronograph hands to zero positioning, press pusher 1.