Enterasys 6000 Guía Del Usuario

Configuring IPX

12-17

Network

is the IPX network address of the network containing the node defined by

Node

Number

Hops

is the number of routers in a packet's path to the destination network.

Transport Time

is the time (in 55-millisecond units) that it will normally take a packet to reach the des-
tination network if this route is used.

Router

Is the hex value of the node address of the router that will forward a packet when this
route is used. If Novell's IPXWAN protocol is used on the interface (as configured in
the IPX Interface file, described earlier in this chapter), this field will be ignored.

Interface

is the IPX network number assigned to the interface used to send packets that are using
this route.

Service Type

is a SAP Service Type code. Some common types are:

0003

= print queue

0004

= file server

0005

= job server

0007

= print server

0009

= archive server

0024

= remote bridge server

Server Name

identifies a specific server in the IPX internetwork.

Server Network Address

is an IPX network number assigned to the network containing the server identified by
Server Name.

Server Node Address

identifies the IPX node attached to the server network.

Table 12-12 IPX SAP Static Route Parameters

Parameter

Valid Values

Default Value

Service Type

0–65535

Server Name

1-48 characters

asterisk (wildcard)

Server Network Address

1–fffffffe

(4 bytes)

00000001

Server Node Address

1–fffffffffffe

(6 bytes)

000000000001

Server Socket Number

0–ffff

0000

Intervening Networks

1–65535