Sony kdl-40s4100 Guía Del Usuario
Getting Started
13
Gettin
g
Starte
d
Connecting the TV
Cable System or
VHF/UHF Antenna
System
VHF/UHF Antenna
System
You can enjoy high-definition and standard-definition digital programming
(if available in your area) along with standard-definition analog
programming.
(if available in your area) along with standard-definition analog
programming.
Cable or VHF/UHF (or VHF only)
Cable System and
VHF/UHF Antenna
System
VHF/UHF Antenna
System
Use an optional A-B RF switch (not supplied) to switch between the cable
and over-the-air antenna programming, as indicated below.
and over-the-air antenna programming, as indicated below.
This TV is capable of receiving unscrambled digital programming for
both cable (QAM and 8VSB) and external VHF/UHF antenna (ATSC).
both cable (QAM and 8VSB) and external VHF/UHF antenna (ATSC).
It is strongly recommended that you connect the CABLE/ANTENNA
input using a 75-ohm coaxial cable to receive optimum picture quality. A
300-ohm twin lead cable can be easily affected by radio frequency
interference, resulting in signal degradation.
input using a 75-ohm coaxial cable to receive optimum picture quality. A
300-ohm twin lead cable can be easily affected by radio frequency
interference, resulting in signal degradation.
75-ohm coaxial cable
Rear of TV
CABLE/ANTENNA
Be sure to set the Cable setting to On or Off in the Channel settings for
the type of input signal you choose (see page 31).
the type of input signal you choose (see page 31).
B
A
Cable
Antenna
A/B
RF Switch
Rear of TV
CABLE/ANTENNA