Hoover u6630900 Guía Del Usuario
3
1. Assembling cleaner
Carton contents
Remove all parts from carton and identify each item
shown. Make sure all parts are located before dispos-
ing of packing.
A. Handle section
B. Cleaner body
C. Hose
shown. Make sure all parts are located before dispos-
ing of packing.
A. Handle section
B. Cleaner body
C. Hose
(some models include an extra hose)
, cleaning tools
and wands
(packed on cleaner)
D. Handle screw packet
(in bag with owner’s manual)
E. Powered hand tool
(packed on cleaner)
Note:
The
white switch lock
above the ON/OFF switch aids
in the
assembly
of your cleaner. Assembly can be continued
if the switch lock is missing. However,
do not remove
the
switch lock
until assembly is completed.
1-1
A
B
C
D
E
This cleaner was inspected and packaged carefully before being shipped from the
factory. If you should happen to need assistance during assembly or operation, call
factory. If you should happen to need assistance during assembly or operation, call
1-800-944-9200
for an automated referral of authorized service
outlet locations (U.S. only)
OR
1-330-499-9499 to speak with a representative in our Consumer
Response Center
OR
Visit us online at
OR
1-330-499-9499 to speak with a representative in our Consumer
Response Center
OR
Visit us online at
www.hoover.com
to find the service outlet nearest you
(click on the “Service” button).
Continued ➜
STEP I Attach handle
Looking at the back of the cleaner,
make sure switch (A) is in the OFF
position.
make sure switch (A) is in the OFF
position.
It may be necessary to move the
hose in order to attach the handle.
hose in order to attach the handle.
Slide handle into back of cleaner.
Push 4 screws into holes on back of
handle.
handle.
Using a Phillips screw driver, tighten
screws securely.
screws securely.
1-2
1-3
A
1 - 4
B
C
D
Remove switch lock (B) above ON-
OFF switch (C) on front of handle by
pulling it straight out. Dispose of
lock.
OFF switch (C) on front of handle by
pulling it straight out. Dispose of
lock.
If switch lock has come off during
assembly, make sure switch is in
OFF position (down) before plug-
ging cord into electrical outlet.
assembly, make sure switch is in
OFF position (down) before plug-
ging cord into electrical outlet.
Remove label (D) from self-propel
button.
button.