Bosch ltc-0335-28 Instruccion De Instalación

Bosch Video Management System

 Devices page | en

Bosch Sicherheitssysteme GmbH

Configuration Manual

Configuration Client | V3 | 2010.07

Additional information is displayed during initialization. When initialization is complete 

(100%), you will also have the opportunity to delete all LUNs again.

Note: On NetApp storage systems, it can take several hours before LUNs are fully deleted. 

During that time, the total capacity of newly created LUNs can be reduced. You can only 

create new LUNs with full capacity after the old LUNs have been completely deleted.

Only displayed for NetApp DSA-N2B20.

Activate this option if you do not wish to use the specified RAID type RAID-4, but would prefer 

to use the more reliable RAID type RAID-DP.

Main window > 

 Devices > Expand 

 > Expand 

 > 

 > Load Balancing tab

Allows you to configure limits for write access. When these values are exceeded, data is not 

written to the iSCSI device but can be lost. For supported devices (for example by Bosch, 

NetApp, or Infortrend) leave the default values unchanged. For another device see the 

documentation of this device. Start testing with small values.

Enter a value smaller or equal to the value in Hard limit. If the values are not exceeded, data is 

written to the iSCSI device without internal reorganization. If they are exceeded but smaller 

than the values in Hard limit, the data is internally reorganized before writing.

If the values are exceeded, data is lost. Reduce the number of cameras that are recorded on 

this iSCSI device.

Main window > 

 Devices > Expand 

 > Expand 

 > Right-click 

 > Map IQNs

Allows you to start the IQN mapping process. 

Main window > 

 Devices > Expand 

 > Expand 

 > Expand 

 > 

Allows you to add, remove, or format LUNs.

Click to display the Add LUN dialog box.

Click to remove the selected LUNs. A message box is displayed.

If you change the number of LUNs, the entire iSCSI system will be reorganized and any videos 

saved on the system will be lost.

Therefore, before making changes, check the recordings and back up any important videos on 

another iSCSI drive or on the computer's hard drive.