Bosch ltc-0335-28 Instruccion De Instalación

Bosch Video Management System

 Alarms page | en

Bosch Sicherheitssysteme GmbH

Configuration Manual

Configuration Client | V3 | 2010.07

Select the appropriate value to configure the order of Alarm Image panes in the Alarm Display 

of the Operator Client.

Enter the maximum count of Alarm Image panes to be displayed in case of an alarm.

Enter the number of seconds until an alarm is automatically cleared. 

This only applies for alarms that are set to Auto-clear in the Alarms page.

Enter the number of seconds for the duration of instant playback.

Only valid for NVR recordings.

Enter the number of minutes for the duration of alarm recording that a user can start manually 

in the Operator Client.

The user can stop the manual recording before this time is elapsed.

Select the check box and enter the number of seconds after an alarm sound is repeated.

Select the check box to ensure that an incoming alarm is displayed even when the screen 

saver is active. If the screen saver requires a user name and password for being interrupted, 

this setting has no effect.

Click to configure that on a monitor not being used for alarm display nothing is shown.

Click to configure that on a monitor not being used for alarm display live display is shown.

Main window > 

 Alarms > 

 or 

 > Alarm Image Panes column > Click ... in one of 

the 1-5 columns

Allows you to select the Logical tree item that is displayed and recorded (if the item is a 

camera) in case of the selected alarm. 

Enter text to find an item in the Logical Tree.

Click to find the camera with the entered search text in its description.

A map displayed in an Alarm Image pane is optimized for display and contains only the initial 

view of the basic 

.dwf file.