Sanyo PLC-WTC500L Manual De Usuario

NOTE ON THE POWER CORD

AC power cord must meet the requirements of the country where you use the projector.

Confirm the AC plug type with the chart below and proper AC power cord must be used.

If the supplied AC power cord does not match your AC outlet, contact your sales dealer.

To power cord
connector on your
projector.

Projector side

AC outlet side

Ground

To the AC outlet .
(120 V AC)

For Continental Europe

For the U .S .A . and Canada

This projector uses nominal input voltages of 100–120 V or

200–240 V AC and it automatically selects the correct input

voltage. It is designed to work with single-phase power

systems having a grounded neutral conductor. To reduce the

risk of electrical shock, do not plug into any other type of

power system.

If you are not sure of the type of power being supplied,

consult your authorized dealer or service station.

Connect the projector with all peripheral equipment before

turning the projector on.

CAUTION

The AC outlet must be near this equipment and must be easily
accessible.

Connecting the AC Power Cord

Connect the AC power cord (supplied) to the
projector.

For the U .K .

To the AC outlet .
(200–240 V AC)

Installation

✔

Note:

•

Unplug the AC power cord when the projector is not

in use. When the projector is connected to an outlet
with the AC power cord, it is in stand-by mode and
consumes a little electric power.