Sanyo PLC-WTC500L Manual De Usuario

Press the MENU button to display the On-Screen 

Menu. Use the Point 

7 8

 buttons to move the red 

frame pointer to the Input Menu icon.

Use the Point 

ed

 buttons to move the red arrow 

pointer to the desired input and then press the 

SELECT button. The signal format menu appears.

Use the Point 

ed

 buttons to select the desired signal 

format and then press the SELECT button.

When the RGB PC (analog) signal is 

connected

When the HDMI signal is connected.

When the RGB PC signal is connected.

When the video signal is connected.

When the component signal is 

connected. 

When the video signal is connected.

When the S-video signal is connected.

* If the projector cannot reproduce proper video image, select a 

system manually (see “Video System Selection” on page 36)

*”Component” can accept the component signal and the analog  
  RGB signal.

Some unsupported RGB signals may be detected to  

 component signals. In this case, please set to “RGB”manually. 

 

* If the projector cannot reproduce proper video image, select a 

system manually (see “Video System Selection” on page 36).

When the RGB PC (scart) signal is 

connected