Sanyo PLC-WTC500L Manual De Usuario

THIS SYMBOL INDICATES THAT DANGEROUS 
VOLTAGE CONSTITUTING A RISK OF ELECTRIC 
SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE 
IMPORTANT OPERATING AND MAINTENANCE 
INSTRUCTIONS IN THE OWNER'S MANUAL 
WITH THIS UNIT.

Before installing and operating the projector, read this 

manual thoroughly.

The projector provides many convenient features and 

functions. Operating the projector properly enables 

you to manage those features and maintains it in good 

condition for many years to come.

Improper operation may result in not only shortening the 

product life, but also malfunctions, fire hazard, or other 

accidents.

If your projector seems to operate improperly, read this 

manual again, check operations and cable connections 

and try the solutions in the “Troubleshooting” section 

in the back of this manual. If the problem still persists, 

contact the dealer where you purchased the projector or 

the service center.

WARNING:  lTHIS APPARATUS MUST BE EARTHED
 

l

– This projector produces intense light from the projection 

lens. Do not stare directly into the lens as much as possible, 
otherwise eye damage could result. Be especially careful that 
children do not stare directly into the beam.

– Install the projector in a proper position. Otherwise it may 

result in fire hazard.

– Allowing the proper amount of space on the top, sides, and 

rear of the projector cabinet is critical for proper air circulation 
and cooling of the unit. The dimension shown here indicate the 
minimum space required. If the projector is to be built into a 
compartment or similarly enclosed, these minimum distances 
must be maintained.

– Do not cover the ventilation slot on the projector. Heat build-up 

can reduce the service life of your projector, and can also be 
dangerous.

– If the projector is unused for an extended time, unplug the 

projector from the power outlet.

–    Do not project the same image for a long time.  The afterimage 

may remain on the LCD panels by the characteristic of panel.

1.5' (50 cm)

1.5' (50 cm)

1.5' (50 cm)

3' (1 m)

SIDE and TOP

REAR

Not for use in a computer room as defined in the 

Standard for the Protection of Electronic Computer/

Data Processing Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle 

que définie dans la norme ANSI/NFPA 75 Standard for 

Protection of Electronic Computer/Data Processing 

Equipment 

When hanging the projector from the 

ceiling, clean air intake vents, filters, or 

top of the projector periodically with a 

vacuum cleaner. If you leave the projector 

unclean for a long time, the cooling fans 

can be clogged with dust, and it may 

cause a breakdown or a disaster.

The symbol mark and recycling systems described below 

apply to EU countries and do not apply to countries in other 

areas of the world.

Your

product is designed and manufactured with high quality 

materials and components which can be recycled and/or 

reused.

The symbol mark means that electrical and electronic 

equipment, batteries and accumulators, at their end-of-

life, should be disposed of separately from your household 

waste.
Note: 

If a chemical symbol is printed beneath the symbol mark, 

this chemical symbol means that the battery or accumulator 

contains a heavy metal at a certain concentration. This will be 

indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead

In the European Union there are separate collection systems 

for used electrical and electronic equipment, 

batteries and accumulators.

Please, dispose of them correctly at your local 

community waste collection/recycling centre.
Please, help us to conserve the environment 

we live in!