Sanyo PLC-WTC500L Manual De Usuario

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that 

contains a small amount of non-abrasive camera lens cleaner, 

or use a lens cleaning paper or commercially available air 

blower to clean the lens. 

Avoid using an excessive amount of cleaner. Abrasive 

cleaners, solvents, or other harsh chemicals might scratch 

the surface of the lens.

When the projector is not in use, replace the lens cap.

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning 

cloth. When the cabinet is heavily soiled, use a small 

amount of mild detergent and finish with a soft dry cleaning 

cloth. Avoid using an excessive amount of cleaner. Abrasive 

cleaners, solvents, or other harsh chemicals might scratch 

the surface of the cabinet.

When the projector is not in use, put the projector in 

an appropriate carrying case to protect it from dust and 

scratches.

Do not use any flammable solvents or air sprays

on the projector and in its vicinity. The explosion or

fire hazard may occur even after the AC power cord

is unplugged because the temperature inside the

projector is extremely high due to the lamps.

In addition, there is a risk that the internal parts

may be damaged not only by the flammable air

spray but also by the cold air.