Sanyo PLC-WTC500L Manual De Usuario

Check the indicators for the projector condition.  

• • • on

• • • off

• • •  blinking at the normal rate       

(approx. 1 second ON,         
1 second OFF)

• • •  blinking slow           

(approx. 2 seconds ON, 
2 seconds OFF)

• • • blinking fast              

(approx. 0.5 seconds ON,  
0.5 seconds OFF)

POWER

WARNING

TEMP.

WARNING

FILTER

SHUTTER

LAMP 1/2

REP. 

The projector is off. (The AC power cord is unplugged.)

The projector is in stand-by mode. Press the ON/STAND-

BY button to turn on the projector.

The projector is operating normally.

(The Shutter is open)

The projector is operating normally.

(The Shutter is closed)

The projector is preparing for stand-by or the projection 

lamp is being cooled down. The projector cannot be 

turned on until cooling is completed and the POWER 

indicator lights red.

The projection lamp is being cooled down in the Power 

management mode.

The projector is in the Power management mode.

The projection lamp is being cooled down in the Shutter 

management mode.

The projector is in the Shutter management mode.  Press 

the ON/STAND-BY button to turn on the projector.

The filter is scrolled using the Filter control function in the 

setting menu. When the filter is being scrolled, the Filter 

replacement icon and “ Please wait...” message (Fig. 1) 

appear on the screen.

✽

✽

✽

✽

Fig .1   Filter replacement icon and “Please wait...”

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽

• • • Differs according to conditions.

✽

✽

✽

✽

✽

✽

✽

✽

✽

✽