TallyGenicom LA48N Guía Del Usuario
Printing
4-2
Using the Control Panel
This printer can directly select some print features from the control panel. These fea-
tures, listed on the control panel, are two predetermined sets (macros) of print fea-
tures and three protocols. Use the following procedures to select Macros and
Protocols:
tures, listed on the control panel, are two predetermined sets (macros) of print fea-
tures and three protocols. Use the following procedures to select Macros and
Protocols:
Macrol selection
1.
Press the Protocol M1 and the Park M2 buttons simultaneously to enter Macro
selection mode. The M1/M2 indicator starts blinking.
selection mode. The M1/M2 indicator starts blinking.
2.
Then press within 3 seconds Protocol M1 button to select macro 1 or Park M2
button to select macro 2. If macro 1 is selected, the M1/M2 indicator lights, if
macro 2 is selected the M1/M2 indicator is off.
button to select macro 2. If macro 1 is selected, the M1/M2 indicator lights, if
macro 2 is selected the M1/M2 indicator is off.
Macro select mode
3.
Press the Pause button to return the printer to the Ready state. You are ready to
print using the selected macro.
print using the selected macro.
NOTE:
The active Macro at power-off remains active at next power-up.