TallyGenicom LA48N Guía Del Usuario

Using Set-Up Mode

5-5

After selecting the desired values, press the Exit/Save button to reprint the 
<FUNCTIONS> menu where the red cursor is positioned beneath SAVE&EXIT.

For each option, the bolded value is the current default value (the value currently 
savedin the printer’s permanent memory).  In the previous example, the default 
values are PORT DEPND (Port Dependent) for protocol selection and DRAFT 
(Draft) for font selection.

To become familiar with the Set-Up mode, try the following example. This example 
shows how to change the vertical pitch in Macro 2 from 6 lines per inch to 8 lines per 
inch.

Enter the Set-Up mode.
Turn the printer off and back on while pressing the Set-Up/Quit button until the 
printer beeps.

Select the Macro 2 function.
Wait for the printer to stop printing and press the 

 button once to position the 

red cursor on the plastic guide of the print head under MACRO 2.  Press the   
button or the   button to select the Macro 2 function and print the <PROTO-
COL> option and its values.

Print the menu of the vertical pitch option.
Since you only want to change the vertical pitch, press the   button to select the 
current protocol.  Bolded PORT DEPND is underlined, and the next option 
<PRTCL SERL> is printed.  (The bolded value indicates the current setting, and 
the underlined value is the new setting.)  Repeatedly press the   button in the 
same way until the <VERT PITCH> option and its values are printed.

Change the vertical pitch from 6 to 8 lines per inch.
Press the 

 button once to position the red cursor beneath 8 LPI.  Press the   

button to select 8 LPI.  8 LPI is underlined, and the next option, <HORZ 
PITCH>, and its values are printed.

Exit the Macro 2 function.
Since you do not want to make any other changes in MACRO 2, press the Exit/
Save button. The <FUNCTIONS> menu is then reprinted, and the red cursor is 
positioned beneath SAVE&EXIT.