TallyGenicom LA48N Guía Del Usuario

Using Set-Up Mode

5-11

We recommend that you use continuous forms paper for printing in the Set-Up 
mode because the output will exceed a single page. To load paper, use the FF/
Load button. To adjust the line position of the paper in the Set-Up mode, use the 
platen knob.

Whenever you enter the Set-Up mode, short help menus are printed at the top of 
the page. Help menus are also printed when you select the TESTS function. Use 
the help menus for quick reference while in the Set-Up mode.

When printing the options and values for each function, you can move either for-
ward or backward in the option list. To move forward (print the next option), press 
the   button.  To move backward (print the previous option), press the   button. 
You can skip printing the value list for the undesired options by pressing and 
holding down these buttons.

While in the <FUNCTIONS> menu or when selecting a function that contains op-
tions and selectable values, press the Exit/Save button to reprint the <FUNC-
TIONS> menu. In this case, the red cursor is positioned beneath SAVE&EXIT.

A bolded (overprinted) value indicates that it is the current setting. An underlined 
value indicates a selected setting.

While in the Set-Up mode, you can use the PRINT function to print out a list of 
the currently selected values. (See the next section for details.)

To exit the Set-Up mode and permanently save your changes, select the 
SAVE&EXIT function. For details, see the section “Save Settings and Exit Set-
up mode” later in this chapter.

To exit the Set-Up mode and temporarily use your changes, press the Set-Up/
Quit button.  Your previous power-on settings will be active when you turn the 
printer on again.